Roller shutter repairs

Roller Shutter Repairs in North Wales

Jammed, off its tracks or motor failed? We repair commercial and security shutters fast.

Free Second Opinions

On any repair quote — no obligation.

Perfect 5.0★ Rating

Five stars on Google — every single review.

Experienced Engineers

Skilled, experienced, directly employed.

Compliant & Safe

All work meets current safety standards.

Regional Coverage

North Wales & the Mid Wales coast.

We repair commercial and industrial roller shutters across North Wales — from shops and warehouses to SR-rated security shutters. Our engineers fix seized motors, damaged curtains, broken springs, bent guide rails and control faults, usually the same day, with 24/7 emergency cover for shutters that trap stock or leave a site open.

Urgent and non-urgent routes are kept separate, so a site-down call can stay focused on getting safe and operational.

Common roller shutter faults we fix

  • Shutter jammed, stuck open or stuck closed
  • Failed or noisy motors and worn gearboxes
  • Snapped springs and barrel faults
  • Damaged or dented curtain slats
  • Bent, packed-out or worn guide rails
  • Faulty controls, key switches and safety edges
Jammed roller shutter at a wet North Wales commercial frontage
Shutter faults checked at the motor, barrel, curtain and guides. MotorsGuide railsSafety edges

Repaired properly, not just reset

We diagnose the root cause, carry common shutter parts on the van and give you a clear price before we proceed. If a shutter is beyond economical repair, we’ll say so and quote a like-for-like replacement — no pressure, no surprises.

From stuck shutter to open shop

  1. Ring our 24/7 line the moment the shutter fails.
  2. We aim to attend the same day and make the opening secure.
  3. The engineer diagnoses the barrel, motor or curtain fault.
  4. We repair with van stock where we can and test it running.

Before you approve the repair

Clear fault finding before parts, replacement or contract spend

Commercial buyers need the opening safe, the fault understood and the next step priced clearly. We make the site safe first, diagnose the root cause, and explain whether repair, replacement or maintenance is the honest route.

Make-safe first We secure, isolate or free the opening before deeper repair work starts.
Repair before replacement Viable faults are repaired; replacement is only recommended when repair stops making sense.
Second opinion friendly Already quoted elsewhere? Send it over and we will give a free, no-obligation view.
Planned follow-up If the same fault is likely to return, we explain the maintenance visit that prevents it.

Answers

Frequently asked questions

My shop shutter is stuck down — can you get it open today?

Yes. A stuck security shutter is an emergency because it stops you trading. Call our 24/7 line and we’ll aim to reach you the same day across North Wales, make the shutter safe and get you open again.

Do you repair electric and manual shutters?

We repair both — electric roller shutters with tube motors or centre motors, and manual push-up shutters with spring barrels. We also service SR-rated security shutters and high-speed doors, whoever supplied them.

How much does a roller shutter repair cost?

It depends on the fault and parts, so we give a clear price on site before starting. Motor and spring replacements cost more than adjustments; we’ll always tell you honestly if a repair isn’t worth it versus replacement.

Can you repair roller shutters in Wrexham and Rhyl?

Yes. We cover Wrexham, Rhyl and the whole of North Wales with in-house engineers, not subcontractors, and aim to attend the same day. A shutter that traps stock or leaves a shop open is an emergency, so we run a 24/7 line and carry common motor, spring and slat parts for first-visit fixes.

What makes a roller shutter jam or come off its tracks?

Most jams come from a snapped spring, a failing motor, bent guide rails or a knock from a vehicle that pushes slats out of line. We diagnose the real cause rather than just forcing it back, then repair the barrel, motor or curtain so the shutter runs freely and doesn’t seize again.

Can you replace just the motor or a few slats?

Usually, yes. Many shutter repairs are a single motor, spring set or a run of damaged slats rather than a whole new shutter, which keeps the cost down. We’ll tell you honestly on site, and if you’ve been quoted for a full replacement elsewhere, we’ll give you a free second opinion.

Emergency repairs

24/7 call-out when you need us most

Door not working? Shutter stuck? Call when the site needs making safe or getting back to work.

Call 01492 200 543

Planning a repair?

Had a repair quote elsewhere?

Send it over for a free second opinion. You can still choose who carries out a repair, even when servicing is covered elsewhere.

See how it works

Our coverage

Proudly Covering North Wales & the Mid Wales Coast

From coast to countryside, our engineers are based locally and ready to respond quickly when you need us.

  • North Wales
  • Mid Wales coast
  • Anglesey
  • Gwynedd
  • Conwy
  • Wrexham
See all areas we cover
North Wales service-area map.A stylised map of Anglesey, Gwynedd, Conwy, Denbighshire, Flintshire and Wrexham, with nearby Powys and the English border shown for context.WrexhamColwyn BayRhylBangorConnah's QuayPrestatynConwyLlandudnoHawardenBuckleyRhosllanerchrugogFlintHolyheadMoldCaernarfon
Choose a service area

Accredited & approved